DIY wooden shower

A summer building on a summer cottage, a wooden shower, despite its small size, is of great importance and benefit. By building such a summer shower in the yard, you can save a lot on your family budget, because bathing water is heated by the sun.

It is easier than ever to buy the specified structure in a finished form. If finances do not allow, you can make a wooden shower for a summer residence with your own hands.

We appreciate the advantages of wood

The most budgetary street shower room for the construction of which wood is used. Surely, after the construction of the country house, such materials as edged board, timber and other remains remain.

The second valuable point - to build a shower with your own hands, you can use moderately cheap and affordable material - wood, if it is coniferous.

Pluses of wood:

1. Availability.

2. Easy to handle.

3. Natural beauty.

4. Ecological cleanliness.

The disadvantages include instability to moisture, susceptibility to damage by harmful bugs. Both the first and second drawbacks are stopped with the help of antiseptics, special means for protecting wood.

Seat selection

Of course, you need to start arranging a wooden shower with your own hands from the right choice of the location of the structure. It is necessary to carefully approach this issue.

If it is planned to heat water in a shower tank only with the help of solar energy, then the place for construction should be illuminated by the sun for a long time, especially in the morning. Only in this way will the water in the shower tank have a comfortable temperature.

If there is no elevation in the summer cottage, you will have to make a mound to drain the water.

When choosing a place to build a summer shower, one should not forget that it should be located so that it is not exposed to wind blowing.

Design, arrangement

In practice, the simplicity of a summer shower made of wood does not require the manufacture of drawings. The project will not be amiss. The first task is to determine the size of the structure.

Estimated height within 2.5 m., It will provide a good pressure of water in the stream.

It is possible to create comfortable conditions in the booth during the adoption of water procedures if its size will be at least 2 x 1.5 m, given the thickness of the walls. Inside, plan a place where there will be a towel hanger, a shelf for detergents.

During the construction process, you will definitely need to buy the following goods:

1. Lumber.

2. Mounts.

3. Hose.

4. A set for a shower.

5. Crushed stone.

Foundation

When building a wooden shower at a summer cottage, you can do without a special foundation. The main thing is to adhere to the upright position of the racks, to ensure their strong connection with the harness, since a heavy container with water will be at the top of the structure.

So that the structure could not tip over, you can build a foundation from piles or pillars. Such an arrangement is not complicated, but reliable. Materials for the foundation may be asbestos-cement or metal pipes with a diameter of at least 90 mm.

The size of the pits for the column foundation depends on the quality of the soil. The dug six pits are filled with cement mixed with pebbles or gravel of a small fraction. In each corner of the foundation, a hewn wooden beam is laid out from the pillars, the cross section of which is 100 x 100 mm. The dressing of the pillars of the summer shower is a closed harness and will serve as a lag for the floor.

Frame

Since the shower will be made of wood, such a building material is also needed for the frame. The construction of the frame begins with the base, which corresponds to the size of the pit. For him, you need boards with a width of 15 cm, a thickness of about 3 cm. For fastening boards, a threaded connection is considered the best option. Four beams with a section of 7 x 10 cm must be attached to the base.

The same jumpers to ensure the stability of the structure are strengthened from above. Added a few jumpers to add reliability to the summer soul. The walls of the shower can be made of planed in a quarter of boards in the form of shields.

Floor device

One of the best options in a wooden shower is the floor, for the manufacture of which wood is used. It is impossible to think of anything better than a terrace board.

Larch planks are especially suitable; they undergo little decay. Such a floor should have slots for draining water, which, together with the natural slope of the soil, provide a rapid outflow of waste water.

Roof device

Handled the wall cladding? So, it's time to start covering the roof. Some use galvanized metal for this. You will need a wooden beam with a section of 50 x 100 mm. and iron.

Lay the beam on the edge of the structure, shifting it with a brick with another beam, which will require two rows of stacked bricks. After waiting for the complete hardening of the solution, fix the metal sheet to the roof.

We install the door and build the walls

Sheathing of the walls of the shower is carried out by the following lumber: lining, raised beam, blockhouse. Between joints of parts it is imperative to leave slots with a thickness of 4 mm. With this connection, the planks of the skin during wetting will not deform each other, expand freely and return to their original position.

The last stage is hanging the door leaf. Usually it is made of wood or chipboard, sheathed with galvanized sheet. You can purchase a ready-made door frame.

When installing the door, the fact of swelling of the wood should be taken into account and gaps should be left. Special overhead seals will help to keep warm. An alternative to a wooden door is foil. In some cases, summer residents just hang a beautiful curtain, but it can not protect from the wind.

Handling, Protection, Security

High-quality wood processing is noteworthy before starting construction. All wood parts must be coated with a primer and varnish. In retail chains, many antifungal antiseptic impregnations are provided. Painting is allowed after the primer ball has completely dried.

High humidity leads to wood rot. Hence, the specified material requires processing. Such protective equipment will help significantly extend the life of a wooden shower.

Dressing. Benefits

Dressing is work that is pleasant and fun to do together with the children. An outdoor shower can be decorated with flowers by planting them in pots or next to a building, drawings, carvings.

The specified summer building has the following advantages:

1. Aesthetics, decoration of a summer cottage.

2. It is not necessary to spend electric energy on heating water.

3. Maintaining health, relieving fatigue.

4. Recovery from stressful situations.

5. The ability to choose different types, taking into account budgetary opportunities.

A summer wooden shower in the country is primarily a vital necessity, especially in the summer heat.